Support: +91 484 405 0332

Intrusion Detection Systems

VISTA-15P is the ideal choice for any residential installation. VISTA-15P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, when used with an AlarmNet® Internet or 4G communicator, the VISTA-15P can be installed in premises without TELCO lines. Hardwired expansion, graphic keypad support, two-wire smoke detectors, scheduling options and a host of end-user and installer features separate the VISTA-15P from all other six-zone panels – offering you and your customers the most panel for the dollar.

Features
• IP alarm reporting and uploading/downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
• Six on-board hardwired zones
– 16 hardwired expansion zones totalling 22
– 26 wireless expansion zones
• Supports two graphic touchscreen keypads
• Eight independent keyfob zones allow wireless keys to be programmed without using any of the 26 zones
• Eight output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
• Two low current on-board trigger outputs
• 50 Event Log viewable at system keypads with time/date stamp
• 32 system user codes
• Two installer configurable zone types allows the installer to "create custom zone types" by assigning all zone attributes
• Multiple actions on output devices depending on system “state”
– Turns light off when system arms
– Turns same lights on when system disarms
– Flashes same lights when system is in alarm
• Built-in phone line cut monitor with programmable delay and annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
• Supports four-wire and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal
Valuable End-User Features
• Now viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• A variety of wireless remote controlsfor single-button operation
• User Scheduling
– Latchkey reports to pagers
– Auto arm/disarm
– “User access” time windows
• Supports up to two numeric pagers
• VIP Module allows system control from any touchtone phone
• Chime by zone
Security Dealer Features
• Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
• Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet Radio
*Requires custom alpha keypad

The VISTA-250BPT is a powerful member of the Honeywell family of commercial alarm panels, integrating burglary, CCTV and access control functions. Many features are available that extend the applications of the VISTA-250BPT while simplifying end-user operation.

Features
• Provides nine onboard style-B hardwired zones
• Supports up to 241 additional zones using a built-in polling (multiplex) loop interface
• Supports up to 249 wireless zones using up to two 5800 Series wireless receivers (fewer if using hardwired and/or polling loop zones)
• Provides 1 power-limited bell circuit delivering 1.7Amp (max) at 12Vdc
• Provides the ability to control eight separate partitions independently, each functioning as if it had its own separate control
• Accommodates 250 user codes with seven authority levels per partition
• Accommodates 32 keypad macro commands per system
• Keeps a log of up to 1,000 events
• Optiflex CCTV support
• Supports up to 16 two-wire smoke detectors on zone 1
• Zone 7 may be used for keyswitch arming/disarming
• Integrates with WIN-PAK access control systems to provide increased users, event log and scheduling
• Supports V-Plex® addressable VISTAKEY access control (up to 15 doors and 500 cards)
• Supports up to 96 programmable outputs
• Supports up to six touchscreen Advanced User Interface (AUI) devices (6272 or later)
• Smoke detector reset at keypad
• Quick exit
• Group bypass
• Arm faulted
• Event arming
• Carbon monoxide (CO) zone type support
• Expanded high-speed RS-232 capability for third party interface and automation
• Internet upload/download over AlarmNet GSM and/or IP communicators over the panel's keypad (ECP) bus
• Ringback support for AlarmNet communicators (confirmation of closing report)
• 24-hour dialer test support for AlarmNet devices
• Supports V-Plex Smart Contact feature for improved responsiveness on systems with many V-Plex zones
• Telco line cut detection

The VISTA-128BPT is a powerful member of the Honeywell family of commercial alarm panels, integrating burglary, CCTV and access control functions. Many features are available that extend the applications of the VISTA-128BPT while simplifying end-user operation.

Features
• Provides nine style-B hardwired zones
• Supports up to 119 additional zones using a built-in polling (V-Plex®, multiplex) loop interface
• Supports up to 127 wireless zones using up to two 5800 series wireless receivers (fewer if using hardwire and/or polling loop zones)
• Provides one power-limited bell circuit delivering 1.7Amp (max) at 12VDC
• Provides the ability to control eight separate partitions independently, each functioning as if it had its own separate control
• Accommodates 150 user codes with seven authority levels
• Accommodates 32 keypad macro commands per system
• Keeps a log of up to 512 events
• Supports up to 16 compatible two-wire smoke detectors on zone 1
• Zone 7 may be used for keyswitch arming/disarming
• Integrates with WIN-PAK access control systems to provide increased users, event log and scheduling
• Supports V-Plex addressable VISTAKEY access control (up to eight doors and 250 cards)
• Easily programmed and maintained by Compass Windows-based downloader
• Supports up to 96 programmable outputs
• Programmable to meet SIA false alarm prevention specifications. To meet UL approval for ANSI/SIA CP-01-2010, order part number V128BPTSIA
• Supports up to six touchscreen Advanced User Interface (AUI) devices (6272 or later)
• Smoke detector reset at keypad
• Quick exit
• Group bypass
• Arm faulted
• Event arming
• Carbon monoxide (CO) zone type support
• Expanded high-speed RS-232 capability for third party interface and automation
• Internet upload/download over AlarmNet GSM and/or IP communicators over the panel's keypad (ECP) bus
• Ringback support for AlarmNet communicators (confirmation of closing report)
• 24-hour dialer test support for AlarmNet devices
• Supports V-Plex Smart Contact feature for improved responsiveness on systems with many V-Plex zones
• Telco line cut detection